Beiträge von dracex11

Zitat von Syagrius

I don't understand your question. You might want to rephrase that.

Your update with stick 3 did not work obviously, so I asked some questions about it. You can answer them or you don't. Your decision. Do you have the manual or not? I did the retrofit update first try on a RAV4 with sat nav and a Corolla without one. So I think I know what I am talking about.

I was just wondering how is possible for MEU to change the Part nr without any problem and for DCU are needed dedicated vehicle parameters and cannot be standardized (with/without nav, with/not DAB and others).

No offence Syagrius I am just tired of trying .

The manual, you mean BE-00439T-TME? This I have. if you have something else please share.

Thanks

Syagrius : I don’t understand if you check my first post you will notice that during the update USB 1-2-1 the MEU part number changed . For DCU is nominal cannot be re written like for the MEU ? 🫤

Zitat von Syagrius

Hi,

you are lucky. I have copied the whole manual. Error code 2 says that there is no car parameter to update. Did you check you navdb_version? There is also a requirement für 2018 v1 or later. You should upload picture of your current Audio, Navigation and navdb_version here.

001	Update failed car parameter	The system will recover by turning OFF/ON the engine, if the multimedia does not recover, a part replacement may be required.
002	There is no car parameter	The system will recover by turning OFF/ON the engine.
003	USB device is disconnected	The system will recover by turning OFF/ON the engine.
004	Update failed car parameter	The system will recover by turning OFF/ON the engine, if the multimedia does not recover, a part replacement may be required.
005	Update failed copy file	The system will recover by turning OFF/ON the engine, if the multimedia does not recover, a part replacement may be required.
006	Update failed install	The system will recover by turning OFF/ON the engine, if the multimedia does not recover, a part replacement may be required.
007	Update failed verification	The system will recover by turning OFF/ON the engine, if the multimedia does not recover, a part replacement may be required.
008	Update failed Pre-install	The system will recover by turning OFF/ON the engine, if the multimedia does not recover, a part replacement may be required

Alles anzeigen

Navidb 2022-v1

Audio 1020

Navigation 1170

Where can I find the car parameter?

Hello all,

I have started the retrofit update of my MM17 system and I am a bit stuck. the stick 1-2-1 installed without a problem and during the installation of USB 3 => Error 002

USB3 error002.jpg

Installation started from

Model ID:

DCU : 17TDT2EU-DA01

MEU : 17TMT2EU-FA00

Part No:

DCU: 86140-33D00

MEU: 86840-06041

and now

Model ID:

DCU : 17TDT2EU-DA01

MEU : 17TMT2EU-FA10

Part No:

DCU: 86140-33D00

MEU: 86840-K0010

retrofit 1.jpg

Do you have any idea how can I pass the upgrade for DCU?

Many thanks for your feedback.